ManufacturerDodge Industrial
Dodge D-Flex Size 12 Hytrel Type HS two-piece split Sleeve Element
Dodge D-Flex Hytrel co-polyester sleeve element size 12 - Type HS two-piece split configuration with catalogue ratings from manufacturer reference data.
Primary catalogue part number
022238
Dodge Hytrel Element P/N
Engineering compatibility: Hytrel elements are for Type S and Type SC flanges only. They are not direct replacements for Type J or Type B flange configurations.
Catalogue ratings
Values preserved from supplied Dodge D-Flex Hytrel manufacturer reference.
| Parameter | Value |
|---|---|
| Element size | 12 |
| Material / construction | Hytrel - Type HS two-piece split |
| Flange compatibility | Type S and Type SC flanges only |
| Rated torque | 31500 in-lbs |
| HP/100 RPM | 50.0 |
| Maximum RPM | 2800 RPM |
| Angular misalignment | 1/4 deg |
| Parallel offset | 0.025 in |
| Axial end float | +/- 0.125 in |
| Torsional stiffness | 225000 in-lbs/rad |
| Torsional wind-up | 7.0 deg |
Interchange / cross-reference
Reference equivalents for size 12 Type HS two-piece split configuration. Verify torque, bore, flange type and element geometry before substitution.
| TB Woods reference | Dodge Hytrel reference | Lovejoy reference |
|---|---|---|
| 12HS | 022238 | HS12 |
Hytrel value proposition
- Four times the power of standard EPDM or Neoprene sleeves of identical size per manufacturer documentation
- Operating temperature range -65 F to +250 F (-54 C to +121 C) per manufacturer documentation
- Excellent chemical, petroleum and mineral oil resistance per manufacturer documentation
- Type H one-piece solid elements sizes 6 through 12; Type HS two-piece split elements sizes 6 through 14
Manufacturer documentation states Hytrel transmits four times the power of standard EPDM or Neoprene sleeves of identical size, supporting downsizing in new layouts where source-qualified.
Split construction advantage
Type HS two-piece split elements include a heavy-duty wire retaining ring, allowing installation and replacement without moving connected equipment.
Request an Engineering Quote
Share shaft bore, speed, torque duty and ordering designation for Size 12 Hytrel. Golden Bearing Company is an authorised Dodge Industrial distributor.